L120

Tabs-L120-18039

Item

Description

61259

L120 I/O Loom

Part No: #61259

This is a high quality, ready made loom that adds 6 analogue voltage inputs and 2 analogue temperature inputs to your L120 terminated loom, quickly and easily. The loom has been made so that it is simple to install, with minimal wiring required. Each of the eight 2 metre leads is individually twisted and heat shrunk for a professional finish.
 
To use this loom the optional L120 I/O Upgrade must be enabled.

61225

Ethernet Cable

Part No: #61225

To configure the L120, a communication cable is required to connect to a PC. An Ethernet cable should be used to connect to the Ethernet port on the PC.

Note: An Ethernet Communications Cable is included with the C127 Race Kits.

61221

Two Button Loom

Part No: #61221

  • Pre-wired with a terminated, plug-in loom
  • Can be mounted in the steering wheel using the optional Curly Cord
  • Curly Cord also provides the flexibility to add extra buttons
62204

Race Terminated Loom

Part No: #62204

The Race Loom provides convenient and easy connection of the C125 Race kit to your vehicle. It allows connection of the C125 to power, ethernet, ECU, GPS and buttons. Also, the loom has an Accessory lead that can be used to connect a MoTeC CAN based product, such as an LTC, Expander, HD-VCS, etc.

65044

Mating Connector

Part No: #65044

34 pin waterproof connector including sockets.

61286

SMS Module

Part No: #61286

The SMS Module, once fitted with a SIM card, allows mobile phone SMS text messages to be displayed on the screen.

Download datasheet

41304_01

GPS

GPS-L10 Part No: #41304,  GPS-L5 Part No: #41305

GPS units can be used with the C127 for speed, position, track mapping and lap timing, plus date, time and GPS statistics.

Note: A 10 Hz GPS is included with the C127 Race Kits.

15512

Lap Timing

Part No: #15512

GPS units are often utilised as a cost effective method of lap timing (see above). The MoTeC BR2 Beacon Receiver is an alternative.

SENSORS

Sensors

A vast range available.

Lambda  Temperature   Pressure   Pitot   Crank, Cam and Speed   Position   Force and Motion  Switches

 

14008_02

Expanders

E888 Part No: #14007,  E816 Part No: #14008

MoTeC's E888 or E816 Expanders can be connected to the C127 with full functionality.


Supplied items may differ slightly to these images.