Yamaha Plug-In Kit

Tabs---ECUs-PWC-Yamaha-m1

MoTeC's Yamaha FX SHO plug-in ECU kit is a fully programmable direct replacement for the factory-fitted ECU.

No rewiring is necessary; the kit plugs into the stock wiring harness using the original sensors and fuel system. All essential functions are maintained, including stock dash display.

  • Plugs straight into standard connectors and uses standard sensors
  • Operates factory dash
  • Fully programmable fuel and ignition tables
  • Programmable electronic throttle launch control
  • Vastly superior RPM limiting

Compatibilty

  • 2009-2016 Yamaha FZR, FZS
  • 2008-2014 Yamaha FX HO, FX HO Cruiser
  • 2008-2014 Yamaha FX SHO, FX SHO Cruiser
  • 2008-2014 Yamaha FX SVHO, FX SVHO Cruiser
  • 2012-2014 Yamaha VXR, VXS

variants

There are 2 variants available, they are:

  • YAMAHA PLUG-IN KIT - M130M
  • YAMAHA PLUG-IN KIT - M150M

PWC PLUG-IN KIT: YAMAHA FX SHO 2008 - M130M

PART #11302

WHAT'S IN THE BOX                                                                                                                    

Includes:

  • MoTeC M130M ECU
  • Enable for the MoTeC M130M ECU
  • Firmware Licence (Yamaha FX SHO 2008 Package)
  • Yamaha FX SHO M130M Adaptor kit, containing:
    • Yamaha FX SHO M130M Adaptor loom 
    • KTC: K-Line to CAN converter
    • Yamaha immobiliser bypass
    • Network cable RJ45 1.5 metre 
  • Yamaha FX SHO M130M PWC Mounting kit, containing:
    • Yamaha FX SHO M130M Mounting Plate
    • PWC M130M Backing Pad
    • Nylock Nuts and Stainless Steel Washers
    • Mounting Screws
  • Logging Licence - Level 1 upgrade available
  • M1 Tune Software
  • Analysis Licence - Level 1 (i2 Standard) upgrade available
MoTeC creates quality products and provide quality support to match.

LINKS

Download | Request A Quote | Support    
 

 

PWC PLUG-IN KIT: YAMAHA FX SHO 2008 - M150M

PART #TBC

WHAT'S IN THE BOX                                                                                                                    

Includes:

  • MoTeC M150M ECU
  • Enable for the MoTeC M150M ECU
  • Firmware Licence (Yamaha FX SHO 2008 Package)
  • Yamaha FX SHO M130M Adaptor kit, containing:
    • Yamaha FX SHO M130M Adaptor loom 
    • KTC: K-Line to CAN converter
    • Yamaha immobiliser bypass
    • Network cable RJ45 1.5 metre 
  • Logging Licence - Level 1 upgrade available
  • M1 Tune Software
  • Analysis Licence - Level 1 (i2 Standard) upgrade available
  • Note this PWC Kit variant does not include a mounting kit
MoTeC creates quality products and provide quality support to match.

LINKS

Download | Request A Quote | Support   
 

Note: GPS communication via CAN - additional adaptor (STC) required

11302 Yamaha M1 Kit

MoTeC creates quality products and provide quality support to match.