To complete your installation, MoTeC has a large range of products available, all designed and/or tested to ensure they work well with your data logger.
Part No: #61112
To configure the ACL, a communication cable is required to connect to a PC. For the ACL an Ethernet to 5 pin Autosport crossover cable is required to connect the ACL to the Ethernet port on the PC.
To display logged and calculated information to the driver, connect the ACL to any MoTeC display.
ACL Autosport USB Extension Cable
ACL 32Gb Autosport USB Data Plug
Transmitter Part No: #61284, Reciever Part No: #61277
Send the logged data to a computer in the pit garage to view live in the pits while the vehicle is still on track.
BR2 Part No: #15512,
The BR2 Beacon Receiver can be connected to the ACL, for lap timing as well as calculation features such as lap time gain/loss, fuel used per lap and fuel predictions.
GPS units specifically adapted to suit MoTeC devices.
Connect sensors to the ACL via a SVIM expander.
E888 Part No: #14007, E816 Part No: #14008,
For inputs and outputs several expander units can be connected to the logger. The SVIM is specifically designed to work with the ACL.
Supplied items may differ slightly to these images.
Useful Links View MoTeC webinars on Data Acquisition & Analysis