To complete your installation, MoTeC has a large range of products available, all designed and/or tested to ensure they work well with your data logger.
Part No: #61225
To configure the EDL3, a communication cable is required to connect to a PC. For the EDL3 an Ethernet cable is required to connect the EDL3 to the Ethernet port on the PC.
To display logged and calculated information to the driver, connect the EDL3 to any MoTeC display.
Transmitter Part No: #61284, Reciever Part No: #61277
Send the logged data to a computer in the pit garage to view live in the pits while the vehicle is still on track.
GPS-L10 Part No: #41304, GPS-L5 Part No: #41305
GPS units specifically adapted to suit MoTeC devices.
Connect sensors to the ACL via a SVIM expander.
E888 Part No: #14007, E816 Part No: #14008,
For inputs and outputs several expander units can be connected to the logger. The SVIM is specifically designed to work with the ACL.
Supplied items may differ slightly to these images.