| FSAE Home | Software | Glossary | Tutorials | FSAE F.A.Q. | Contact Us |
MoTeC Systems USA is a proud sponsor of the Collegiate Formula SAE competition. Each year aspiring racing engineers design, model and construct miniature formula type race cars and compete against as many as 200 other schools at the Pontiac Silverdome in Michigan and at the California Speedway in Fontana.
MoTeC offers the following packages for 1st time MoTeC buyers.
Engine Management:
| M4 ECU with Advanced Tuning & Logging | Wide Band Lambda Upgrade |
| Wide Band Lambda Sensor | 1 Bar MAP Sensor |
| M4 10 foot unterminated Harness | 1 Bar Barometric Pressure Sensor |
| 3/8 NPT Engine Temp Sensor NTC | 3/8 NPT Air Temp Sensor NTC |
| Clockwise rotation Throttle Sensor | Counter-Clockwise Throttle Sensor |
| Harness Termination Kit | Communications Cable |
| MoTeC Engine Management Software | |
|
CALL FOR CURRENT PRICES |
|
| *Request for quotes must be accompanied by a letter on University letterhead signed by the Department Facilitator stating that the purchase will be used solely for a FSAE project. | |
| *Kit must be purchased in its entirety - no substitutions | |
| *Kit and price available only through MoTeC Systems USA - Distributors may charge additional fees | |
Data Acquisition:
Draw a track-map and get accurate laptimes using the combination below.
| MoTeC SDL Data Logger | 8Mb Logging Memory |
| Base SDL Harness | USB Communications cable |
| Internal 2 Axis Accelerometer | Hall Effect Wheel Speed Sensor |
| 1000 Channel Beacon Transmitter | 1000 Channel Beacon Receiver |
| MoTeC SDL Configuration Software | MoTeC Data Analysis Software |
| Communicates with MoTeC ECU's | USB communications - download 8Mb in 20 seconds! |
|
CALL FOR CURRENT PRICES |
|
| *you may substitute other sensors instead of the Beacon assemblies - but you lose track mapping | |