I like to see a full access to E8xx inputs and outputs (is possible) from Mx00s ecu.
I do have M800 PnP and I like to use the
1. Gear change ignition cut
2. Traction control
4. Gear Shift
5. Anti Lag
All of those needs Dig input which I have only one available. E8xx has 6 dig inputs and according to the manual dig input 5-6 can be used as switched inputs. It would be great if those dig 1-6 can be used as switched inputs and accessed by the Mx00 ecu manager
Plus more resolution to table like the Injector battery compensation, Main Fuel table, Ignition timing table, etc.