Stepper idle speed control

Covers current and earlier Subaru and Mitsubishi Plug-In systems

Stepper idle speed control

Postby service on Fri Jan 15, 2010 3:32 pm

hi!
Help please, have a mitsu .. evo 8 ecu 800. not activate idle speed control.function 8 in all the parameters correctly! but does not work! :oops:
Best regards
service
 
Posts: 4
Joined: Wed Apr 29, 2009 10:13 pm
Location: Russia

Re: Stepper idle speed control

Postby service on Wed Aug 10, 2011 9:34 pm

Hi all
Why does the tab View Scrin option is not active Stepper servo?
Just does not work, or shows junk parameter Idlle Actuator pos.
All settings are recommended for a manual moteс by EVO8
service
 
Posts: 4
Joined: Wed Apr 29, 2009 10:13 pm
Location: Russia

Re: Stepper idle speed control

Postby service on Wed Aug 10, 2011 9:34 pm

Hi all
Why does the tab View Scrin option is not active Stepper servo?
Just does not work, or shows junk parameter Idlle Actuator pos.
All settings are recommended for a manual moteс by EVO8
service
 
Posts: 4
Joined: Wed Apr 29, 2009 10:13 pm
Location: Russia

Re: Stepper idle speed control

Postby MarkMc on Tue Aug 16, 2011 4:23 pm

The stepper servo position is not used for Stepper motors. Can you attach your configuration so I can have a look at it.
MoTeC Research Center Melbourne, Australia
User avatar
MarkMc
MoTeC
 
Posts: 545
Joined: Thu May 01, 2008 12:28 pm


Return to M800 Plug-In ECUs

Who is online

Users browsing this forum: No registered users and 0 guests