For multiple LTC NTK/LTCD NTK installations, LTC Manager software allows all units to be simultaneously managed and diagnosed.
Note: MoTeC LTCD NTKs come pre-configured to suit a single LTCD NTK unit installation in which case the use of LTC Manager if not required.
- The software is used to:
- configure and calibrate all LTCD NTKs on the CAN bus
- display readings and diagnostics
- configure CAN transmission addresses
- control free air sensor calibration
- update LTCD NTK firmware
|LTC LTCD Manager V1.1.2.0014||8 MB||Feb 6th 2017 14:07|