For multiple LTC NTK/LTCD NTK installations, LTC Manager software allows all units to be simultaneously managed and diagnosed.
Note: MoTeC LTC NTKs come pre-configured to suit a single LTC NTK unit installation in which case the use of LTC Manager if not required.
- The software is used to:
- configure and calibrate all LTC NTKs on the CAN bus
- display readings and diagnostics
- configure CAN transmission addresses
- control free air sensor calibration
- update LTC NTK firmware
|LTC LTCD Manager V1.1.2.0014||8 MB||Feb 6th 2017 14:07|