Communication Cables

A serial cable is required to connect a PC to the PLM.

Sensors

• Bosch LSU 4.0 LSU 4.2 and LSU 4.9

• NTK UEGO

Looms and Adapters

To connect the PLM to the sensor requires a common loom—available in 2.6 and 6 meter—and an adaptor suited to the type of sensor used.

PLM Sensor Weld-in Bung

The sensor can be screwed into the stainless steel or mild steel ring. The rings contains a lip which makes welding to the exhaust pipe easier. The bung closes of the ring when there is no sensor mounted.

The PLM is available in a kit including all essential accessories.
If you require any of the accessories separate, please contact your dealer.