Home > Products > Data Acquisition > SDL3
SDL3
MoTeC has a large range of products that are compatible with your data logger to complete your installation.
Communication Cables
To configure the SDL3, a communication cable is required to connect to a PC. For an SDL3 an Ethernet cable should be used to connect to the Ethernet port on the PC.
Lap Timing
The MoTeC BR2 Beacon Receiver can be connected to the SDL3 for lap timing as well as calculation features for lap time gain/loss, fuel used per lap and fuel predictions.
Shift Lights
The CAN-based SLM Shift Light Module or traditional single shift lights.
Sensors
Lambda sensors, position sensors, force and motion sensors, pressure sensors, temperature sensors and speed sensors.
Expanders
To increase the input and output capacity, several expander units can be connected to the data logger.
GPS
GPS units specifically adapted to suit MoTeC devices can be used as alternative to traditional lap timing systems.
